Jacto ARBUS 1000, Руководство оператора

Страница: 114 / 134

5-114
5
M
A
INTE
NAN
CE
ARBUS 1000 Operation chart
Table 12: Operation
Operation chart
Periodicity
When
receiving the
equipment
When using the
equipment for
the first time
Whenever
spraying
Whenever
filling
the tank
Strictly follow the information contained in
this instructions manual.
•
Check all components for integrity. •
Check the accessory box components. •
Demand for assembly of components and
accessories, operation and maintenance.
•
Perform cleaning and lubricate all drive
shaft grease points.
•
Check whether the pins and cotter pins
usedat the three points are original parts.
•
Make sure about the PTO shaft clearances. •
Check whether the coupling pins are
properly provided with cotter pins.
•
Remove the tractor’s drawbar. •
Adjust commands to prevent the same from
causing impacts on tractor during opera-
tions.
•
Check the grease fittings for lubrication. •
Check if the oil is on the level
in the components. •
Calibrate the tires. •
Retighten the tank fastening nuts an lug nuts. •
Use personal protections equipment (PPEs). •
Do not travel at excess speeds. •
Do not spray chemical against
the wind direction. •
After the work, take off clothing
and take a shower. •
Caution with electric networks. •
Do not smoke, eat or drink
during the application. •
Do not work at high speeds. •
Clean the suction or lines filters. •
Clean nozzles and their strainers. •