Jacobsen Standing Zero Turn Rotary Mower ZT90023, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 24 / 60

6 CONTROLS
en-23
6.2.10 CUTTING UNIT HOC LEVER ________________________________________________
The cutting unit height of cut (HOC) lever lifts and lowers the cutting unit.
Install the HOC pin in the correct hole for the cutting height. To lower the
cutting unit, press the button on the top of the lever and lower the lever
against the HOC pin.
See 7.7 for the HOC pin hole chart.
To lift the cutting unit, pull the lever to the vertical position. When the cutting
unit is lifted, the button on the top of the lever will lift and stop the lever.
6.2.11 DISCHARGE CHUTE LEVER ________________________________________________
The discharge chute lever opens and closes the discharge chute located
beneath the discharge deflector. When you mow around flower beds or
edges of paths, the discharge chute can be closed to limit the discharge.
Never mow with the discharge deflector removed.
NOTICE
To prevent damage to the HOC pin or the cutting unit, slowly lower the
lever against the HOC pin. Do not allow the cutting unit to drop from the
lifted position against the HOC pin.
WARNING
The operator must be careful of persons and objects near the mower. Do
not release the cut grass in the direction of persons
or allow persons near
the mower while in operation.
The cutting unit can discharge objects for long distances with the
discharge deflector removed. Remember that the operator and/or owner
are responsible for accidents or hazards that occur to other persons or
their property.
Button HOC
Lever
HOC Pin
HOC Holes
Discharge Chute
Lever
Open
Closed
!