Jacobsen ransomes hr3806, Руководство по обслуживанию и запасным частям

Страница: 21 / 172

GB-19
RANSOMES HR3806 Series: DZ
MAINTENANCE AND PARTS MANUAL
ADJUSTMENTS
6.2 REAR WHEEL TOE-IN
The rear wheels should have 1/8" (3.2mm) toe-in
from the front of the wheel to the back of the wheel.
Adjust as follows:
1. Loosen locknuts N at balljoints near both rear
wheels.
2. Rotate the tie rod O until wheels are correctly
positioned. Adjust both tie rods an equal
amount.
3. Re-tighten locknuts. The tires should then be 1/
8" closer at the front than the rear.
6.3 ALTERNATOR
The fan belt is adjusted so that it can be deflected
5mm (0.2in) with a force of 5 kg (11 lbs) applied
midway between the crankshaft and alternator
pulley. (Fig.17) To adjust:
1. Loosen alternator bolts S & T.
2. Move the alternator to tighten or loosen fan
belt.
3. Tighten bolts S & T.
Check belt tension and condition of belt every 250
hours.
6.1 SPEED LIMITER
The transport and mow speeds are factory set and
should not need altering.
NOTE : Textron Turf Care cannot be held responsible
for loss of performance or machine damage if these
speeds are adjusted outside the speeds shown in the
machine specification.
Fig.16
Fig.17
6 ADJUSTMENTS