4 CONTROLS
13
4.2.10 FILTER LIGHT MODULE ___________________________________________________
The filter light module has an amber fuel filter light and a red charge filter light.
The fuel filter light indicates that moisture was sensed in the fuel. Check and replace
the water separator and fuel filter elements as needed.
The red charge filter light indicates low-charge pressure in the traction system. Stop
the engine and check the hydraulic oil level in the tank. Damage to the hydraulic
components can occur when the mower is operated with the charge filter light
illuminated.
4.2.11 TURN SIGNAL MODULE ___________________________________________________
The turn signal module indicates the position of the turn signal lever included with the
road light kit.
When turn signal lever is in the center position, both turn signal lights are OFF.
When the turn signal lever is in the down position, the left-side turn signal light will
flash.
When the turn signal lever is in the up position, the right-side turn signal light will
flash.
4.2.12 PTO SWITCH ____________________________________________________________
The PTO switch is a 2-position knob type switch to engage and to disengage the mowers. The PTO
switch must be in the OFF (down) position to start the engine.
Pull on the red knob to move the switch to the ON position. When the PTO switch is in the ON position
and the decks are lowered, the blades will start to turn. When the cutting units are lifted, the blades
will stop.
The mower will automatically switch to 4WD with the PTO switch in the ON position.
4.2.13 LIGHT SWITCH___________________________________________________________
The light switch controls the operation of the optional work lights and the
road lights.
Press the front part of the switch to turn on the road lights. Press the rear
part of the switch to turn on the work lights. Put the switch in the center
position to turn off the lights.
Fuel filter
Charge
filter
Right Turn
Left Turn
Road
Lights
Work
Lights
