Jacobsen LDEA130, Инструкция по безопасности и эксплуатации/Руководство по техническому обслуживанию и запасным частям

Страница: 31 / 118

GB-29
RANSOMES MASTIFF 91
SAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL
CORRECTION OF MINOR FAULTS
FAULT REMEDY
Variation in the height of cut grass Front rolls are not square with bottom
across the width of cut. blade. Make necessary adjustment as per
instruction on page 38.
Grass is cut unevenly in wavy or Alignment if cutting cylinder has been upset,
hummocky fashion. probably through running into an obstruction.
Consult your local service centre.
Grass is torn off instead of being Adjust cutting cylinder to the bottom blade,
cut evenly. see page 38 . If grass is still not cut cleanly, the
cutters require sharpening. Consult your local
service centre.
Grass is removed entirely and mower labours. Bottom blade set too low.
Raise height of cut. See page 38.
Engine races but mower moves forward sluggishly. Cylinder may have run into an obstruction.
Stop engine and clear. If no obstruction is present
the problem may be due to clutch slip. Consult
your local service centre.
Cuttings not entering grassbox properly. Adjust throw of concave, see page 40.