13. Take red power and black ground wires that are at the bottom of the right rear tube and
route along the mounting bracket and into the engine bay. Connect the black ground wire to
the negative post on the battery with 1/4" loop connector provided. Shorten if necessary, then
solder connector to wire. Connect the red power wire to the positive post on the battery with
provided 1/4" loop connector. Shorten if necessary, then solder connector to wire.
14. Use provided zip ties to tidy up wiring after installation is complete. Ensure wiring avoids
moving or hot engine components.
June 2021© Jacobsen HR6010 ROPS Installation Manual
