Jacobsen HR3300T, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 76 / 86

en-76
12 QUALITY OF CUT
12.5 STREAKS
NOTE: Arrow indicates direction of travel.
A streak is a line of uncut grass. This is usually caused
by a damaged blade.
Probable Cause Remedy
Damaged blade(s). Replace blade(s).
Turning too aggressively. Cutting units don’t overlap
during turns or on side hills.
Turn less aggressively to allow cutting units to over-
lap. Change mowing direction or pattern on side
hills.
Tire mats down grass before it is cut. Check/adjust tire inflation pressure. (
Refer to Mainte-
nance Section.
)
Wet grass is matted down before it is cut. Cut when grass is dry.
Tire mats down grass before it is cut. Check/adjust tire inflation pressure.
Wet grass is matted down before it is cut. Mow when grass is dry.
TN0224