Jacobsen Bunton 630024, Установка, Запчасти и Обслуживание

Страница: 6 / 41

4
Gear
Drive
Midsize
ASSEMBLY/SET-UP INSTRUCTIONS
9. Remove and discard the shipping sleeves G.
10. Remove and discard tie wraps at locations
shown.
11. Wire tie harness and throttle cable to upper
handle as shown.
12. Attach gear select plate G to bottom of the select
support, using (2) 5/16-18X3/4 bolts and (2)
5/16-18 nuts supplied in parts bag.
13. Attach gear shift lever A removed in Step 2 to
the lower shift arm with (2) M8-1.25 X 20 Bolts
and (2) M8-1.25 whizlock nuts as shown. Shift
the lever to the neutral position and verify that
the lever is centered side to side in the neutral
position. If not, loosen the M8 bolts and
reposition gear shift lever A. Retighten bolts.
14. Install traction rod E, set aside in Step 5 on both
sides of the power unit as shown.
NOTE: Swivels should point outward at the upper
handle with the rod on the inside of the control
bracket.