Jacobsen Bunton 630024, Установка, Запчасти и Обслуживание

Страница: 13 / 41

11
Gear
Drive
Midsize
LUBRICATION
The maintenance schedule detailed is for average
operating conditions. Under extreme conditions
(dusty, dirty or more than 8 hrs continuous use)
maintain more frequently.
Engine (daily)
Check the engine for oil leaks.
Cooling Fins and Air Intake screen (daily)
Ensure that the cooling fins and air intake screen I
are cleaned daily. Continued operation with a
clogged cooling system will cause severe
overheating and result in engine damage.
Air Cleaner (every 25 hours)
Service more frequently if operating in very dusty or
dry conditions. Extensive damage will result from
operating with a dirty air cleaner.
1.
Remove the air cleaner cover by releasing
latches L.
2. Remove the foam precleaner by sliding it off the
paper cartridge. Wash in kerosene or detergent
and water. Dry thoroughly. Saturate in engine
oil. Squeeze to remove excess oil.
3. Reinstall all parts.
NOTES:
Every 50 hours remove the paper element by
loosening wing nut W. If dirty, replace.
DO NOT use petroleum solvents to clean the
paper element. They may cause it to
deteriorate.
DO NOT use pressurized air to clean or dry
element.
See the Setup, Parts & Maintenance manual for
service part numbers.
In-Line Fuel Filter
When required, the fuel filter B may be replaced.
See the Setup, Parts & Maintenance manual for
service part numbers.
Tires
Tire pressures should be maintained at 14 psi.
NOTE: Adjusting tire pressure between 10 psi and
28 psi can improve tracking. Increase pressure on
the side the machine tracks toward and decrease it
on the other side.