49
BDV:
Immediate change (default: disabled)
The amount relative to a selection is
generally cashed after the dispenser has
sent the “Successful selection” signal.
When you enable this function, the
cash signal is sent at the start of the
dispensing cycle.
The setup of this parameter is compulsory.
Booking time (default: 7 seconds)
To set up for the cash payment how long
the dispenser displays the residual credit
necessary to dispense the selection.
Type of dispensing
To set the operation mode by multiple
or single dispensing. In case of multiple
dispensing, the change is not automatically
given at the end of a successful delivery,
but the credit will remain available for
further dispensing. If you press the coin
return button, the remaining credit will
be returned if its value is lower than the
maximum change value.
Credit return (escrow lever)
To enable/disable the credit return (by
pressing the change return key) if no
dispensing has been performed.
If enabled, this function will provide for
the return of the coins even if the first
dispensing cycle has not occurred.
If a delivery has failed for any reason, the
change will be returned.
Maximum credit
Use this function to define the maximum
accepted credit for inserted coins.
Maximum change
You can set a limit on the total amount of
the change the coin mechanism will pay as
soon as you press the change button or
after one single dispensing.
The credit exceeding the amount you
have programmed by this function will be
cashed.
Accepted coins
To define which coins shall be accepted
among those recognised by the validator.
For the coin/value correspondence check
the label showing the position of the coins
on the coin mechanism.
Coins accepted for change
To program the refusal of a coin in case of
“exact amount”.
For the coin/value correspondence check
the label showing the position of the coins
on the coin mechanism.
