17
Fig. 4.12- Heating icon
Please take the following preparations
when the dispenser is not to be used for a
long period, e.g. holidays:
1. Remove the product packs and check
the expiry date.
2. Store the product packs in a refrigerator
until you switch the dispenser back on
again. When the expiry date has passed,
throw the product packs away.
Caution:
Do not freeze product packs.
3. Do a complete cleaning procedure of
the dispenser.
4. Pull the power plug out of the socket.
5. Close the water tap.
1. Open the water tap.
2. Insert the power plug.
The dispenser starts heating up water
and starts cooling down the cooling
compartment. Drink delivery will be
blocked until the water in the boiler has
reached the correct temperature.
3. The heating icon (busy thermometer)
will be shown on the touch screen (fig.
4.12).
4. Once the water has reached the
preset temperature, the heating icon
will disappear from the display, the
dispenser is now ready for operation.
Note:
Heating the water inside the boiler
will take approximately 15 minutes
at room temperature. The cooling of
the product compartment can take 24
hours or more.
Note:
If the dispenser has been shut down
for longer periods, the date and time
must be set so the programmed
cleaning cycles and eco settings are
reactivated.
Switching off the dispenser
Switching on the dispenser
