7
symbol indication
Battery fully charged.
Battery half charged.
Empty and you hear a warning tone – the battery capacity is low and needs
charging. Remains steady when the line is in use.
Displayed when the ringer volume is set to OFF.
Phone book review mode. It shows when Phone Book records are being
viewed.
Flashes while connecting and receiving calls.
It shows that the phone’s microphone is muted.
Message Waiting Indicator. Depending on your operator’s service, this symbol
turns on when a voice message is left in your message box registered with the
telephone operator.
Hands-free speaker phone is on.
Keypad lock. It shows when the keypad is locked.
Intercom/internal call. It shows when intercom is in use.
A constant receiving power symbol shows good reception and transmission
power of radio signal.
c.
Buttons AnD tHeir functions
Before going through the following keypad functions, it is a good idea to understand
that multiple functions may be assigned to a single button in order to reduce buttons
cluster. On some buttons, short and long push on one button gives you different
functions in different modes. Pay attention to the following description regarding long
and short push. Short push means push and release immediately. Long push means
push and hold for approximately two seconds.
Button
in standby mode
in conversation mode
in programming /
viewing mode
on Handset unit
Push this button to
access the menus.
To enter:
Mute, Internal call,
Sound Enhancer,
Flash, Redial
In programming
mode, press this
button to confirm a
setting.
To enter digit 0-9
To enter digit 0-9
To enter digit 0-9 or
to enter alphabet
characters.
Long push toggles
“P” for pause.
This button functions
as
when a
short push is given.
To enter
To enter
This button switches
the handset keypad
lock on and off after
a long push.
To enter
