11
4. Press
/
to select the option (i.e. “Warning”, “Call waiting”, “Range
Alarm”) and
to confirm.
5. Press
/
to display either “On” or “Off” and press
to confirm. For
“Key”, select from “pattern 1-3” or “Off” and press
6. Press
to exit and return to standby mode.
D.12. DiAl mode
You can set your phone to use either “Tone” or “Pulse” dialing. The pre-set setting is
“Tone” dialing, where you will hear a tone beep each time you dial a number. Most
modern exchanges and switchboards use “Tone” dialing, so you should not need to
change this setting. Only change it if your switchboard uses “Pulse” dialing or if you
cannot make a call using “Tone” dialing.
Key Map:
setting Base
Additional
Dial mode
select
tone/pulse
1. Press
to access the main menu.
. Press
/
to select “Setting Base”. Press
3. Press
/
to select “Additional”. Press
4. Press
/
to select “Dial Mode”.Press
. The current setting is
displayed.
5. Press
/
to select either “Tone” or “Pulse”. Press
to confirm.
6. Press
to exit and return to standby mode.
D.13. tone dialing switch-over
If you have set your phone to use “Pulse” dialing, you can switch temporarily to
“Tone” dialing for the duration of a call:
1. Press
. Enter the number you want. Press and hold
“D” will be displayed. Any digits
entered after the “D” will be dialed using tone dialing.
D.14. prefix dialing
If you need to add a prefix to the number for a long distance call, or if you need to
add your saved area code to the number, do the following:
Key Map:
setting Base
Additional
prefix Dial
enter
the number
1. Press
to access the main menu.
. Press
/
to select “Setting Base”. Press
3. Press
/
to select “Additional”. Press
4. Press
/
to select “Prefix Dial”.Press
. The current setting is
displayed.
5. Enter the number using the number keypad or press
to clear.
Press
to confirm.
6. Press
to exit and return to standby mode.
D.15. call barring
When switched on, Call Barring prevents calls from being made to a specific number,
area code or international code.
Key Map:
setting Base
call Barring
enter the number
select
on/off
1. Press
to access the main menu.
. Press
/
to select “Setting Base”. Press
3. Press
/
to select “Call Barring”. Press
4. Enter the number using the number keypad or
to clear. Press
to
confirm.
5. Press
/
to select “On” or “Off”. Press
to confirm.
6. Press
to exit and return to standby mode.
e.
normAl operAtion
e.1. to make a new call
1. You can only make a call with your handset. You cannot make a call from your base
unit.
. On the handset, enter the telephone number to be called and press
(if you
press
again, you can toggle to speaker phone). The entered number will be
dialed automatically. After a short delay, the call timer will start timing the call, if
“Time” is selected in “Talk Display” menu.
