manualshive.com logo in svg

Jackson TempStar Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 23 / 78

Поделиться
Скачать
Jackson TempStar Series Скачать руководство пользователя страница 23

17

DETERGENT CONTROL

INSTALLATION & OPERATION

DETERGENT CONTROL:

 Detergent usage and water hardness are two factors that contribute greatly to how efficiently 

this dishmachine will operate. Using detergent in the proper amount can become a source of substantial savings. A 

qualified water treatment specialist can relate what is needed for maximum efficiency from the detergent. 

1. Hard water greatly affects the performance of the dishmachine, causing the amount of detergent required for washing 
to increase. If the machine is installed in an area with hard water, the manufacturer recommends the installation of water 
treatment equipment.

2. Deposited solids from hard water can cause spotting that will not be removed with a drying agent. Treated water will 
reduce this occurence. 

3. Treated water may not be suitable for use in other areas of operation and it may be necessary to install a water 

treatment unit for the water going to the dishmachine only. Discuss this option with a qualified water treatment specialist.

4. Dishmachine operators should be properly trained in how much detergent is to be used per cycle. Meet with a water 
treatment specialist and detergent vendor to discuss a complete training program for operators. 

5. Certain dishmachine models require that chemicals be provided for proper operation and sanitization. Some models
may require the installation of third-party chemical feeders to introduce those chemicals to the machine. The manufacturer 
does not recommend or endorse any brand name of chemicals or chemical dispensing 
equipment. Contact a chemical distributor for questions.

6. Some dishmachines come equipped with integral solid detergent dispensers. These dispensers are designed to accom-

modate detergents in a certain-sized container. If applicable, relate this to a chemical distributor upon first contacting them.

7. Water temperature is an important factor in ensuring that the dishmachine functions properly, and the machine's data 
plate details what the minimum temperatures must be for the incoming water supply, the wash tank and the rinse tank. If 
minimum requirements are not met, there is a possibility that dishes will not be clean or sanitized. 

8. Instruct dishmachine operators to observe the required temperatures and to report when they fall below the minimum 
allowed. A loss of temperature can indicate a larger problem—such as a failed heater—or could indicate that the hot water 
heater for the operation is not up to capacity and a larger one may need to be installed.

Содержание TempStar Series















































































Отзывы:

Нет отзывов