Jackson Systems T-32-TS Touchscreen Thermostat, Руководство по установке

Страница: 54 / 63

TESTING
The T-32-TS incorporates a short-cycle timer which can be disabled during testing by
setting slide switch 3 to the ON position. Once testing is completed, the time should
be enabled by setting the switch to OFF.
Touch until the word is displayed. Touch until the words
appear. After a brief moment, the internal fan relay ‘G’ will energize and the system fan
should operate. Touch
again until the word appears. After a brief
moment, the internal fan relay will de-energize and the system fan will shut off.
Touch until the word appears. Touch the arrow and raise the setpoint
above the space temperature and the first stage differential. After a brief moment, the
internal heating relay ‘W1’ will energize and the heating system should operate. The
word
will flash continuously. If the thermostat has been configured for two stage
heating, raise the setpoint above the second stage differential and the second stage
heating relay ‘W2’ will energize. The word
will flash twice, pause and repeat the
sequence to indicate second stage has been energized.
TESTING FAN OPERATION
MODE OFF FAN Always On
FAN Automatic
TESTING CONVENTIONAL HEATING AND COOLING OPERATION
MODE Heat UP
Heat
Heat
52