MODE
O/RIDE
PROG
FAN
Cool
Heat
Setting the clock
PROG
PROG
PROG
PROG
The T-32-P has a real-time clock.
To set the clock, press the
key until the hour
flashes on the LCD. Use the up ( ) or down ( ) key to
set the current hour along with the AM and PM
symbol. Press the
key again until the minutes
flash. Use the up ( ) or down ( ) key to set the
current minutes. Press the
key again until the
day flashes. Use the up ( ) or down ( ) key to set the
correct day of the week. Press the
again to
exit the clock and day of week program.
PROG
KEY
UP / DOWN
KEYS
Day
Setting the temperatures
SET
Heat
Cool
Heat
Cool
Cool
SET.
Press the up ( ) or down ( ) key for 3 seconds. The T-32-P will display the word
and the
temperature setting for the current mode (
or
). Press the up ( ) or down ( ) key to change
the setting. If Auto mode is selected (Shown by both
and
on the display), after adjusting
the heating temperature wait without touching a key for 3 seconds. The T-32-P will change to show
and
Press the up ( ) or down ( ) key to change the temperature setting for cooling. Wait 3
seconds and the
T-32-P will automatically exit the menu. The new temperature settings will be maintained in memory.
Switching between day and night temperature settings
Day / Night
Day
Night
Day
Night
PROG
Day
Night
Reviewing Set Temperatures
If the HVAC installer has set the
function, the T-32-P will keep two heat and two cool
temperature settings. This provides a convenient method to manually select
(occupied) or
(unoccupied) settings. To toggle between the
and
settings, press the
key. Set the
and
temperature settings as previously described.
You can review the set temperatures at any time by simply pressing the up ( ) or down ( ) key.
Common Functions
MODE Key
MODE
OFF
Heat
Cool
Heat / Cool
E. Heat
The
key is used to cycle through the available modes.
(Auto)
(emergency heat for heat pump systems only)
9