8
Figure 7
Figure 8
NATURAL GAS CONVERSION
1. Remove the Cook Grid and Cook Grid Support, then turn the Searing Side Burner upside down.
2. Using a 10mm and 12mm wrench, remove the Propane Orifice (Fig. 7).
3. Lightly coat threads of the Natural Gas Orifice with Gas Teflon Tape or Gas Fitting Pipe Dope.
4. Install Natural Gas Orifice in the Brass Elbow, at the Searing Burner (Fig. 8). Tighten as required.
5. After Natural Gas had been connected to the built-in grill, turn gas on and check all gas connections, per
‘Leak Testing’ (previous page).
TECH TIP
Do NOT over tighten the orifice,
as the threads may break off.
