background image

 

!SAFETY WARNINGS! 

 

 
 
SAFETY FIRST: 

 

Please read and understand all warnings and precautions prior to operating your Side Burner. 

 

This accessory is for outside use only, and shall not be used in any building, garage, enclosed area or 
vehicle. 
 

This Side Burner is set up from the factory for use with Propane Gas (LP). (Propane Cylinder /Tank not 
included) 

.     

Do not use gasoline, alcohol or other volatiles for lighting purposes. 
 

The Propane (LP) gas supply cylinder must be constructed and marked in accordance with the 
specifications for propane gas cylinders of the US Department of transport (DOT) CFR 49 or the National 
Standards of Canada, CAN/CSA B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous 
Goods. 

 

Do not alter this accessory in any manner. 

 

Do not touch any metal surfaces on this side burner until it has completely cooled to avoid burns, unless 
wearing protective gear. (Pot holders, gloves, BBQ mittens, etc.) 

 

It is essential to keep the valve compartment, burners, and circulating air passages clean and free of 
obstructions and debris. Inspect the grill before each use. 

 

Do not store any spare propane cylinders within 10 feet of this Side Burner. 

 

Please note that propane (LP) is explosive under pressure, heavier than air, and settles and pools in low 
areas, which can create an explosion hazard. 

 
10 

Caution: contact with propane gas can cause freeze   
burns to your skin. 

 

11

 

Dented and rusted propane cylinders may be

 

hazardous and should be checked by a propane   
gas supplier, before use.

 

 

 

 
 
 
 
 

PACKAGE CONTENTS CHECKLIST: 

 

 
The following parts are included in this side burner package: 

 

1 x Searing Burner Body with Lid (attached) 
1 x Stainless Steel Flex Hose 
1 x Stainless Steel Cook Grid 
1 x Cook Grid Support 
1 x Natural Gas Orifice (for Natural Gas Conversion)     
1 x Owner’s Manual 

 
 

!WARNING! 

Failure to follow all 

manufacturer’s 

instructions could result in serious 
bodily injury and/or property damage.

 

 

Содержание JGSBSEAR










Отзывы: