7
gas only. The hose and hose couplings
comply with CGA Standard CAN 1.83.
No modifications or substitutions
should be attempted.
4.
Protect the hose from dripping grease
and
do not allow the hose to touch
any hot surface, including the base
of the grill.
5.
Inspect the seal in the QCC cylinder
valve when replacing the LP
gas
cylinder or once per year, which ever
is more frequent. Replace the seal if
there is any indication of cracks,
creases or abrasions.
6.
Inspect the hose before each use of
the appliance. If the hose is cracked,
cut, damaged or abraded in any way,
the appliance must
not
be operated.
7.
For repair or replacement of hose /
regulator assembly, contact your
dealer or approved service center.
C
ONNECTION
1.
Be sure the cylinder valve and
appliance valves are “off”.
2.
Place full LP gas cylinder on tank ring
bracket.
3.
Center the nipple in the cylinder valve
and hold in place. Using the other
hand, turn the hand wheel clockwise
until there is a positive stop. Do not
use tools.
Hand tighten only.
When making the connection, hold
the regulator in a straight line with
the cylinder valve, so as not to
cross thread the connection.
4.
Leak test the connection. See “leak
test”.
5.
Refer to lighting instructions. To avoid
activating the Flow Limiting Device
when lighting, open the cylinder valve
slowly with the appliance valves off. If
the Flow Limiting Device is accidentally
activated, turn off cylinder valve and
appliance valves, wait 10 seconds to
allow the device to reset, open
cylinder valve slowly, then open the
appliance valve.
I
MPORTANT
S
AFETY
I
NFORMATION
THE PRESSURE REGULATOR AND HOSE
ASSEMBLY SUPPLIED WITH THIS
OUTDOOR COOKING APPLIANCE MUST BE
USED. REPLACEMENT PRESSURE
REGULATORS AND HOSE ASSEMBLIES
MUST BE THOSE SPECIFIED BY THE
OUTDOOR COOKING GAS
MANUFACTURER.
1.
Do not store a spare LP-gas cylinder
under or near this appliance.
2.
Never fill the cylinder beyond 80% full.
IF THE INFORMATION IN “A” AND “B”
IS NOT FOLLOWED EXACTLY, A FIRE
CAUSING DEATH OR SERIOUS INJURY
MAY OCCUR.
