USE WITH BATTERY PACK (SOLD SEPARATELY)
LCD Screen On/Off
05
CHARGING YOUR JACKERY EXPLORER 1000 PLUS
Green energy first: We advocate to use the green energy first. This product supports two modes of
charging at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give
priority to solar charging and both methods will be used to charge the battery at the maximum
permissible power.
GB
To turn on, press the Main Power Button or when there’s a charging input, the screen display will light
up automatically. To turn off, press the Main Power Button again and the screen display will turn off.
Or, if there is no operation in 2 minutes, the product will enter a sleep state and the screen display will
automatically turn off.
To get the screen always-on (under charging or discharging state), follow these steps:
After the
display screen lights up, double-click the Main Power Button and the mode of Always-On Display will
be on.
To turn off Always-On Display, follow these steps:
Press the Main Power Button and the screen will be
turned off in 2 minutes.
Tip:
During Always-On mode, the screen automatically turns off after 2 hours without charging or
discharging.
This product can support up to 3 battery packs to meet the need for large power capacity. For
details on how to use it, please refer to the Jackery Battery Pack 1000 Plus User Manual.
SAFETY PRECAUTIONS WHEN USING
When using the battery pack, please do not stack more than two battery packs on top of the
Jackery Explorer 1000 Plus to prevent it from falling off and causing injury.
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Android application markets. Please refer to the User
Manual for Jackery App for detailed connection instructions.
EPS: Emergency Power System.
Once you have connected the mains and the AC input port of the EPS via the AC charger cable, you
can use the AC output port of the EPS to power your unit (at this point the AC power comes from the
mains, not the EPS battery). In the event of a sudden loss of mains power, the EPS can automatically
switch to battery mode within 20ms. Since this is a non-professional UPS function, it does not support
0ms switching. Do not connect to equipment with high uninterruptible power requirements such as
data servers and workstations. Please test several times to confirm compatibility before use and it is
recommended to connect to only one device. Do not use more than one unit at a time to avoid
triggering the overload protection. Failure to follow these instructions may result in equipment failure
or loss of data for which we cannot be held responsible.
APP CONNECTION
