Jack JK-T781D, Руководство пользователя

Страница: 16 / 64

- 9 -
E12
电源开启时，未插入定位器。
The positioning device is not inserted
when power is turned on.
自动进入无定位器模式运作，且切线、扫线、上定位等以
及所有定针缝式样缝制功能亦无效。
Automatically enter into no locator mode, and tangent,
sweeping lines, positioning and all fixed stitch pattern
sewing function doesn’t work.
马达可正常操作。
The motor can be normal operation.
（请检查定位器是否忘记插入或异常）
(Please check locator is forgot to insert or abnormal)
E13
电力模块过热保护
Power module overheating protection
检查电力模块与散热片是否接触良好。
Check the power module and heat sink is a good contact or
not.
E14
编码器信号异常
Encoder signal is abnormal.
检测编码器信号是否正常，或更换编码器。
Check encoder signal is normal or not, or replace the
encoder.
E15
电力模块不正常过流保护
Power module is abnormal
over-current protection.
模块驱动出力与机头出力将全部关闭。
The module driver output with head power output will be
shutting down.
等待电源重新开启 / 复位。
Waiting for the power to re-open / reset
（请仔细检查电源板各项机能）
(Please check the power board of the each function)
E17
机头保护开关没到正确位置
The head protection switch is not to
correct position.
检查机头是否掀开，机头开关是否损坏。
Check the machine head is opened or not, the switch is
damaged or not.
E18
机械锁保护错误代码
Error code of mechanical lock
检查机械锁位置是否正常，保护开关是否有损坏
Check mechanical lock protection switch is abnormal or not,
protection switch is damaged or not.
E19
大盘保护错误代码
Error code of the broader protection
检查感应块位置是否正常，传感器是否有损坏
Check the low speed cam is normal, the sensor whether there
is damage
From the library of: Superior Sewing Machine & Supply LLC