Jack JK-T781D, Руководство пользователя

Страница: 15 / 64

- 8 -
3
：错误代码表 ERROR CODES TABLE
错误码
Error Code
内容
Cause
对策
Solution
E1
1) 电力模块错误代码
Error code of power module
2) 不正常过电流或过电压
Abnormal over-current or
over-voltage
模块驱动出力与机头出力将全部关闭
The module driver output with head power output will be
shutting down.
等待电源重新开启
/
复位
Waiting for the power to re-open / reset
（请仔细检查电源板各项机能）
(Please check the power board of the each function)
E7
a) 马达插头配线接触不良导致不
转
Motor connector caused bad turn.
b)
定位器信号异常。
Locator signal abnormality.
b) 车头机构死锁或马达皮带异物
卷入卡死。
The front agencies deadlock or the
motor belt foreign body embroiled stuck.
c) 加工物过厚，马达扭力不足无法贯
穿。
Processing the material is too thick,
motor torque not sufficient throughout.
e)
模块驱动出力异常。
Module driver output abnormality.
模块驱动出力与车头出力将全部关闭。
The module driver output with head power output will be
shutting down.
等待电源重新开启
/
复位。
Waiting for the power to re-open / reset.
（请检查车头是否卡住或定位器、马达、模块驱动等信号
是否异常）
(Please check the front is stuck or locator 、 motor 、 module
drive signal is abnormal or not)
E9
定位器信号异常
Locator signal is abnormal.
检查上下定位信号是否正常，或皮带轮是否过于松动。
Check the upper and lower positioning signal is normal or
not, or if belt pulley is too loose.
E11
电源开启即自动找上定位，但定位器
没有插入控制箱，针上信号无法输
出。
The power is turned on automatically
find on positioning. But locator is not
inserted into the control box, the
needle signal cannot be output.
自动进入无定位器模式，且切线、扫线、上定位等以及所
有定针缝样式缝制功能亦无效。
Automatically enter into no locator mode, and tangent,
sweeping lines, positioning and all fixed stitch pattern
sewing function doesn’t work.
马达可正常操作。
The motor can be normal operation.
（请检查定位器是否异常）。
(Please check locator is abnormal or not).
From the library of: Superior Sewing Machine & Supply LLC