10
11
In order to assure that your juicing experience will be a pleasant one, we have
included this “Step-by-Step Guide to Juicing”. Juicing is a quick and satisfying
way to get the vitamins, nutrients, and minerals from fresh fruits and vegetables…
a few minutes well spent for a lifetime of good health benefits!
STEP-BY-STEP GUIDE TO JUICING
5 Simple Steps to Get Started
Before You Begin
While we manufacture and ship under the highest standards,
we recommend you clean your Power Juicer before first use.
Step 1
Remove all packing materials including those found inside the machine between
the Lid and the Blade.
NoTe: If you do not remove the paper Blade Protector from the inside of the
machine before starting the motor, you will hear a loud noise and possibly
cause the machine to temporarily shut down.
Step 2
Disassemble and wash before first use. Reassemble making sure the Blade
is secure and Locking Bar is locked into place. The motor will not turn on if
machine is not assembled properly.
Note: See Assembly and Disassembly instructions on pages 6-10 in this
operating Manual.
Step 3
Lower the Juice Spout into the downward position.
Step 4
Plug the Power Cord into a 120-volt wall outlet and turn on machine. Let the
juicer run for approximately 5–10 seconds
before produce is inserted into
the Chute. This will balance the Blade. (During the manufacturing process, a few
drops of motor lubricant may have dripped into the motor housing causing a
burn off odor. This is normal and will dissipate with initial use.)
Step 5
Remove Pusher, insert produce, then replace Pusher quickly. Do not force
produce down the Chute. Apply a gentle pressure, this will help the Pusher
process the produce.
IMPORTANT: If you apply too much pressure it can cause the motor to
strain and possibly shut down. Do not overfill the chute with produce
because this may jam the juicer and cause it to shut down. This can also
cause a juice overflow in the receptacle.
