16
EN
g
LiS
h
Jabra A7010 Bluetooth hub
17
EN
g
Li
Sh
Jabra A7010 Bluetooth hub
nOTE:
The Jabra A7010 will continue to search for a headset for 5 minutes.
·
When your headset and Jabra A7010 have paired successfully, the Jabra A7010 LED (2) will flash blue 10
times. your headset may also give an audible or visual indication (see its user manual).
nOTE:
If you accidentally put the Jabra A7010 into pairing mode,
tap
the pairing button (3) to exit pairing
mode.
your Jabra A7010 can be paired with multiple headsets. If the Jabra A7010 has been paired with multiple
headsets, and more than one headset is in range, the Jabra A7010 will seek to establish communication with
the most recently connected headset.
adjusting settings with a test call from your desk phone
·
Place your headset on your ear and
tap
the headset Answer/End button.
·
Press the appropriate button on your desk phone to establish a dial tone.
·
If you cannot hear a dial tone or it is unclear, slowly slide the Dial Tone Switch (1) from A through G until you
hear a clear dial tone. The Dial Tone Switch (1) is preset to setting A, since that setting is most commonly
used.
