jablotron JA-82K OASiS, Руководство по установке

Страница: 19 / 22

JA-82K control panel installation manual - 19 - MKH51102
fig. 18 continues
Function
Sequence
Options
Factory
default
Setting to
comply with
EN-50131-1
Notes
Service mode only with
s user (master) code
697x 6971 = YES 6970 = NO
NO YES
Device reactions and section assignment
(detectors, key fobs, control panel and
keypad inputs)
•
A detector’s natural reaction
can be INS, DEL or Fire (selectable in the
detector)
•
The natural reaction of Control
panel & Keypad wired inputs is DEL
Keyfob natural reactions: (or )=
SET (arm) , (or )= UNSET (disarm)
and both simultaneously = Panic. If a
reaction from 2 to 8 is selected (see
opposite), only the key
(or ) and
double buttons + ( + ) will have
it. The ( ) button has no effect (can still
be used for controlling UC/AC receivers).
•
Assignment to sections will only
have an effect on partial arming or if the
system is split (except PG output control)
•
For partial arming, a pair of
keyfob buttons assigned to section:
A has the effect: (or )=SET A,
(or )=SET AB
B has the effect: (or )=SET A,
(or )=SET AB
C has the effect: (or )=SET ABC,
(or )=UNSET ABC
•
In a split system, a keyfob
button pair assigned to section:
A=SET/UNSET A, B =SET/UNSET B, C
=SET/UNSET ABC
61 nn r
s
Code (card) reactions and section
assignment
•
A code (card) may have the same kind
of reaction as devices
•
Assignment of the code to sections is
useful for split systems only. In a split
system, a code (card) assigned to C will
SET/UNSET all ABC sections.
62 nn r
s
nn
= address 01 to 50
r = reaction
0 disabled (incl. tamper
sensor)
1
Natural – this means:
for detectors =selected by
DIP switch in the detector,
for wired inputs =DELay,
for Codes
(cards
)=SET/UNSET
2 Panic
3 Fire
4 24 hours
5 Next DELay
6 INStant
7 SET (arm)
8 PG control (s: 1=PGX,
2=PGY,3=PGX+PGY)
9 SET/UNSET (toggle)
s = section 1=A, 2=B, 3=C -
has to be entered even if the
system is not split and setting
(arming)has no meaning.
all
Natural
in C
When the detector is disabled
(r=0), the tamper sensor is not
triggered,
Natural reaction of control panel
wired inputs (or IN keypad input)
is delayed (DEL)
Enrollment by keying in production codes
60 nn
xxxxxxx
x nn = address 01 to 50, xxxxxxxx = last 8 digits of the
production code (below the bar code on the device)
Automatic Daily Setting/Unsetting schedule
(arming/disarming)
64
nahh
mm
n – action sequence index (0 to
9)
a – action:
0=no action
1=SET ABC
2=UNSET ABC
3=SET A
4=SET B (if unsplit then AB)
5=UNSET A (if unsplit then ABC)
6=UNSET B (if unsplit then ABC)
hh - hours, mm - minutes
No action
The scheduled actions will
happen every day
Changing the service code 5 NC NC NC = new code (4 digits) 8080 enter NC twice
Go to maintenance mode 292 switches to maintenance
mode
-
Setting the internal clock
4 hh mm DD MM YY
00:00
1.1.00
Editing keypad text
Text for device names, code names and
PG output names are stored in each
individual keypad.
Press and hold the
?
key to enter text
editing (the first character of the first
address name will start flashing). Then
use keys:
and to select some text (or an
address)
1 & 7 character selection
(A,B,C,D...8,9,0)
4 & 5 cursor (to the left & right)
2 to erase a character
# =
exit editing and save changes
Device
Only capital letters can be entered this way. If
there are multiple keypads, each must be edited
individually this way or all of them can be easily
programmed via OLink software