The JA-162J One-way two-button keyfob
The JA-162J One-way two-button keypad
2 / 2
MMJ56104
LED indication table
Action
Indication
Activation (pressing) the button
0.5 s flash of red LED
1x short acoustic signal
Send enrollment signal
1 s flash of red LED
Deactivation (turn off) keyfob lock
or deactivation of acoustic
indication
0.5 s flash of red LED
1x short acoustic signal
Activation (turn on) keyfob lock
or activation of acoustic indication
2x 0.5 s flash of red LED
2x short acoustic signals
Low battery
Short flash of red LED
3x short acoustic signals
Holding the button – transmitting
of maintained signal for PG copy
flashing 2x per 1 s
1x short acoustic signal
Table: 2. Remote control indication
Battery replacement
Low battery indication is signalled on the remote control after any
button is pressed. The action assigned to the button is done and the red
LED flashes with 3 quick beeps. Low battery information is also sent to
the control panel. The remote still works as usual but the RF range goes
slowly down. Low battery indication is cancelled when a new battery is
inserted.
To change the battery, unscrew the 2 screws from the back plastic;
remove the cover with the metal strut from the housing. Then press any
button a few times to discharge the rest of the energy from the
capacitors and insert a new battery.
Don´t throw the used battery into the trash but take it to a suitable
recycling station.
Technical specifications
Compatible with:
control panel FW LJ(MD)60416+; F-Link 1.4.0+
Power - lithium battery
type CR 2032 (3.0 V / 0.2 Ah)
(Power supply C class according to EN 50131-6)
Current consumption:
- Nominal consumption
ȝ$
- Maximal consumption
33 mA
Low battery voltage detection
2.2 V
Typical battery lifetime
approx. 2 years (10 activations / day)
Communication frequency
868.1 MHz
RF range
approx 100 m (line of sight)
Dimensions
77 x 36 x 15 mm
Weight with no battery
32 g
Classification
Security grade 2 / environmental class II
- according to
EN 50131-1, EN 50131-3 (digital key)
- number of unique production codes
> 1 Million
- environment
indoor general
- operational temperature range
-10°C to +40°C
- average humidity
75 % RH, no condensation
- certification body
Trezor Test s.r.o. (no. 3025)
Also complies with
ETSI EN 300 220, EN 50130-4,
EN 55022, EN 60950-1
Can be operated according to
ERC REC 70-03
JABLOTRON ALARMS a.s. hereby declares that the JA-162J is in
a compliance with the relevant Union harmonisation legislation:
Directives No: 2014/53/EU, 2014/35/EU, 2014/30/EU,
2011/65/EU. The original of the conformity assessment can
be found at www.jablotron.com - Section Downloads.
Note:
Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the producer after use.
