7
6.0 - USER MANUAL
-
HANDSET DESCRIPTION.
GT889:
3 buttons with electronic key incorporated.
GT884N:
multifunction button
(Optional)
.
I
t integrates a sensor which keeps the “LINK” transmission
active. If the sensor doesn’t detect vibrations for more than
2 minutes, it reduces the transmissions and so the battery
consumption.
Note:
avoid falls and shocks to not damage
the sensor.
-Button: to arm and disarm the alarm system.
- Switch: to activate/deactivate the automatic transmission.
- MANUAL ARMING/DISARMING.
ARMING: press the “ON” handset button, the arming is confirmed by an indicators flash, by a beep and
by the constant RED LED switching on for 30 seconds, after it start flashing.
DISARMING: press the “OFF” handset button, the disarming is confirmed by two indicators flashes, by
two
beeps and by the LED switching off (the system emits 4 flashes and 4 beeps if during the
“surveillance” an alarm has been detected and 5 additional beeps if an anomaly is present ).
- AUTOMATIC TRANSMISSION ENABLING/DISABLING (ONLY WITH GT884N).
ENABLING: move the A switch to ON. To enable the “Link” function in the system carry out a manual
transmission (i.e. disarming).
To enable, activate the alarm system manually (i.e. arming).
DISABLING: move the A switch to OFF. To disable the “Link” function in the system carry out a
commutation with a remote control handset not in “Link” function.
- AUTOMATIC ARMING/DISARMING (ONLY WITH GT884N).
ARMING: going away from the motor vehicle the system arms automatically. The arming is confirmed
by an indicators flash, by a Beep and by the RED LED constant switching on for 30 seconds, after that
it starts flashing.
Note:
with the GT884 remote control handset (“Link”) it is not possible to arm the system manually, it is
possible only to disarm it.
DISARMING: when you come back to the motor vehicle, to disarm the system it is enough to have with
you the remote control handset in “AUTOMATIC TRANSMISSION-LINK” mode and turn the ignition key
on. The disarming is confirmed by two indicators flashes, by two beeps and by the LED switching off
(the system emits 4 flashes and 4 beeps if during the “surveillance” an alarm has been detected).
- SHOCKS/MOVEMENT SENSOR ISOLATION (only with GT889).
In the first 5 seconds after the arming a press of the “ON” button deactivates the shocks/movement
sensor, the operation is confirmed by an indicators flash and by a Beep.
- PANIC FUNCTION
- After 10 seconds from the arming press the “ON” button for one second, a sound alarm starts with
the contemporaneous indicators flash with a duration of 30 seconds.
- Press a second time on the “ON” button to stop it.
LED
BUTTON
GT884
(Opzional)
LED
SERVICES
BUTTON
ON
OFF
GT889
