External document
File name:
EYE-02 Wireless peripherals
9/12
URL:
http://www.jablocom.com/download
Picture 5: Using EYE-02 camera with relays
Example 1: On your cottage you have a watering system with water pump placed in the well. You connect the
power supply of the pump via the relay AC-82. Then you remotely turn on the watering in your cottage. You can
adjust the time for which you turn on the watering depending on the weather. You can also turn the watering on for
unlimited period of time until you remotely turn the watering off.
Example 2: You automatically turn off domestic appliances by switching the camera into WATCH mode when you
leave home. You connect the appliances into the mains via the smart socket AC-88. After you return you switch the
camera into SLEEP mode and the appliances will turn on again. This minimizes the risk of fire when you are not at
home and it reduces consumption of electricity.
Example 3: You leave home for a longer time. Before you return, you would like to have your home heated to
comfortable temperature. You will use the relay AC-83 together with thermostat TP-83. You will remotely turn ON
the relay. The thermostat will start controlling the relay which will turn on the heating. Your rooms will be heated to
predefined temperature before you arrive. If you wish to maintain only minimum economical temperature you
switch the relay OFF.
Camera switches can be configured to several modes.
SMS ON/OFF
Switch will turn ON or OFF after pressing a button in JabloTool or after
sending an SMS command.
Example of use: Turning ON or OFF heating at home.
SMS ON/OFF (
pulse)
Switch turns ON for a specified period of time after which it turns OFF
again. The period of time can be specified in SMS command.
If no time is
specified the Switch will turn OFF automatically after 2 seconds.
Example of use: Switching garden sprinkler ON for 2 hours.
WATCH (camera switched into
WATCH mode)
Switch will turn ON and will remain turned ON as long as camera is in
WATCH mode.
Panic alarm (external detector
generated Panic alarm),
Switch will turn ON for 120 seconds.
Fire alarm (external detector
generated Fire alarm)
Switch will turn ON for 120 seconds.
Alarm (detector generated Alarm)
Switch will turn ON for 120 seconds.
Wake-up (camera was woken up)
Switch will turn ON for the predefined wake-up time. The time can be
configured in JabloTool via USB > Configuration, General settings.
AC fault (AC power failed)
Switch will turn ON and remain turned ON until AC power is recovered.
Example of use: Relay UC-82 will turn ON diesel power generator after AC
power failure.
Light ON (camera infrared
illumination was turned ON).
Switch will turn ON and remain turned ON as long as camera infrared
illumination is turned ON.
Example of use: Smart socket AC-88 will turn ON external infrared
illumination after camera activates its internal infrared illumination. This will
increase the reach at which pictures can be taken at night.
