External document
File name:
EYE-02 Wireless peripherals
8/12
URL:
http://www.jablocom.com/download
Wireless outdoor siren JA-80A
JA-80A is completely wire-free siren in a solid housing. It signalizes intruder alarm acoustically and
by red LED lights. The length of sounding in case of an alarm event can be set between 0 seconds
and 4 minutes (go to JabloTool, Peripherals, then click on the enrolled JA-80A). If the internal siren
JA-80L is also enrolled, it sounds alarm for the same period of time.
The siren is battery powered. Maximum battery lifetime is 3 years.
Opening the cover signalizes Alarm (unauthorized manipulation) to the camera.
LED lights keep flashing for 30 minutes after Alarm.
4.1 Enrolling sirens
Siren should be at least 2 meters away from the camera during enrolment.
4.1.1
Enrolling JA-80L
1. Reset the siren if it has been previously enrolled in another device
Unplug the siren from the mains socket.
Press and hold the siren button and plug the siren in the mains socket.
Keep the button pressed until two beeps are heard which confirms a reset.
2. The indicator keeps flashing after reset (device is in enrolment mode).
3. Send the enrollment signal from the camera.
Go to JabloTool via internet, tab Peripherals and click on Add new device, or
Go to JabloTool via USB, click on the icon of camera in the list of on-line devices, go to
Configuration, External devices and click on Add new device, or
Note: Do not use remote control to switch the camera in the Enrol mode when siren is in Enroll
mode because the remote control would then enroll into the siren.
4.1.2
Enrolling JA-80A
1. Reset the siren by unplugging its battery. Do the reset if another device has been previously enrolled in the
siren.
2. Switch the camera into enroll mode. The options are described in the chapter 1.2.
3. Insert battery into the siren.
The siren stops flashing after it is enrolled.
5
S
MART SOCKET AND RELAY MODULES
Relay modules make or disconnect electrical contact to the commands by the camera. Relays may have the shape
of AC power socket that can be directly plugged into the AC 230V mains or boxes to which wires of electric circuit
are attached.
The relays are powered by the mains AC 230V (relays AC-82 and AC-83) or by 12V DC (relays UC-82).
5.1 Using smart socket and relay modules
Camera EYE-02 is equipped with two virtual switches. These switches work as wirelessly sent commands to relays
to make or disconnect their contact. The switches can be remotely controlled in JabloTool via internet or via USB
cable. They can also be controlled by SMS commands.
When the peripherals are turned ON by the camera they make contact and appliances powered via these
peripherals are turned ON. When they are turned OFF they disconnect contact and appliances are turned OFF.
Relays can also be set to inverse mode - they disconnect the contact when they are turned ON and vice versa.
