manualshive.com logo in svg

Jabiru j160, Руководство по эксплуатации продукта, Страница: 2 / 67

Поделиться
Скачать
Jabiru j160 Скачать руководство пользователя страница 2

I A P   2 0 2 0 . 0 0 1 - A F M   /  

J A B I R U   J 1 6 0 / J 1 7 0

                 

  P a g e

 | 

2 

 

FOR SIMULATION USE ONLY 

 

FOREWORD 

AUTHORITY 

Users are to regard this Flight Manual as an authoritative publication.  It is 
compiled from data available from operating, technical, manufacturing and 
safety sources, and represents the best level of information available.   

These instructions provide you with a general knowledge of the simulated 
aircraft, its characteristics, and specific normal and emergency operating 
procedures.  Instructions in this manual are for a pilot inexperienced in the 
operation of the simulation aircraft. 

APPLICABILITY 

This Flight Manual applies to the 

Jabiru J-160/J170 product by IRIS Flight 

Simulation Software for Microsoft Flight Simulator

. 

 

Under NO circumstances is any component of this product intended to 
replace, or compliment, any form of real-world training materials.  

The intended use is for entertainment purposes ONLY.  ALWAYS refer to 
approved publications from the aircraft manufacturer when flying aircraft. 

 

OPERATING INSTRUCTIONS

 

This manual provides the best possible operating instructions, however, on 
occasions these instructions may prove to be a poor substitute for sound 
judgment.  Multiple emergencies, adverse weather, terrain and other 
considerations may require modification of the procedure. 
 

PERMISSIBLE OPERATIONS 

The Flight Manual takes a ‘positive approach’ and normally states only what 
you can do.  Unusual operations and configurations are prohibited unless 
specifically covered herein.   
 
 

Содержание j160




































































Отзывы:

Нет отзывов