J-Tech Digital JTECH-VW-4KPR, Руководство по эксплуатации

Страница: 15 / 40

15
2. Connect the TX and RX with the Ethernet switch, Then connect the PC with
the Ethernet switch.
Because this unit support DHCP, Different unit with different IP address of the
factory reset, so The first thing we need know the IP address of each unit.
There is two way to get the IP address
1) Via “Node List”
Open the “Node List “in the “Tool” file, Press twice the “Node_list.bat” to enter
the dialog box
Then we can see all the IP address of both the TX and RX show as bellow
black dialog box.
Remark: If the IP address with “Client”, It’s the IP address of the RX
If the IP address with “Gateway”, It’s the IP address the TX.