J-Tech Digital JTECH-VW-4KPR, Руководство по эксплуатации

Страница: 11 / 40

11
6. INSTALLATION
6.1 Device Connection
1. Check the power supply is unplugged.
2. Set up the group of the transmitter with the correspondent receiver for
signal extension and display.
3. Connect the Transmitter to video source with HDMI cable, and connect
Receiver to a monitor or display with HDMI cable.
4. Connect the USB cables from Transmitter to PC, and connect the USB
additional devices such as USB mouse, USB keyboard and USB pen drive to
Receiver.
5. Connect Transmitter and Receiver to the Ethernet switch with network
cable.
6. Power on the Transmitter, Receiver and all the connected devices.
7. Power on and activate all the connected devices.
8. Connect the IR extension cable with Transmitter and the IR receiver
cable with Receiver for remote control.
◆
Configuration