3
www.jperkinsdistribution.co.uk
SpecIal featureS
OPtIMIzED OPEratIng SOftWarE
LiPro Dual 6 features an AUTO function that sets the feeding current during the process of charging
or discharging. Especially for Lithium batteries, it can prevent overcharging which may lead to an
explosion due to the user’s fault. It can disconnect the circuit automatically and alert the user once
a malfunction is detected. All the programs of this product are controlled through two way linkage
and communication, to achieve the maximum safety and minimize the trouble. All the settings can be
configured by users!
IntErnaL InDEPEnDEnt LIthIUM BattEry BaLanCEr
Balance Charging
LiProPlus 8 has an individual cell voltage balancer built in so it does not need a separate balancer
when charging Lithium batteries. It has separate balance ports for 2-6 cells.
Balance Discharging
Individual cells can also be monitored during the discharge process. If the voltage of any cell varies
abnormally the discharge process will be stopped.
SUItaBLE fOr VarIOUS tyPES Of LIthIUM BattEry
Three types of Lithium battery are accepted by the LiProPlus 8 charger, LiPo, LiIo and LiFe. Due to the
chemistry of the different batteries they have different characteristics. The correct battery can be
chosen from the USER SET PROGRAM menu before the charge process is started.
faSt anD StOragE MODE Of LIthIUM BattEry
Lithium battery charge purposes can vary, so you have the option to choose between fast charge
and store charge method. ‘fast’ charge reduces the duration of charging, whereas ‘store’ state
can control the final voltage of your battery, so it can be stored for a period of time and protect the
lifespan of the battery.
MaxIMUM SafEty
Delta-peak sensitivity:
The automatic charge termination program works on the principle of the Delta-peak voltage
detection. When the battery’s voltage exceeds the threshold, the process will be terminated
automatically.
auto-charge current limit:
When charging NiCd or NiMH using the “AUTO” current mode, the upper limit of charge current can
be set to avoid high charge current. This can be useful when charging low impedance and small
capacity NiMH batteries.
Capacity limit:
The charging capacity is calculated by a multiple of the charging current and time. If the charging
capacity exceeds this limit the charge process will be terminated automatically when the set
capacity is reached.
Charge time limit:
You can also set a maximum charge time to prevent any possible over charge.
Input power monitor:
This function monitors the input voltage from your battery supply and will automatically stop the
charge program if your battery falls below the required level.
