manualshive.com logo in svg

J. Perkins LIPRO DUAL 6, Инструкция по эксплуатации

Поделиться
Скачать
J. Perkins LIPRO DUAL 6 Скачать руководство пользователя страница 24

22

www.jperkinsdistribution.co.uk

gEL CELL (PB, LEaD aCID) DISChargE PrOgraM

 

The following program is only suitable for discharging Gel cell (Pb, Lead-Acid) batteries 

with nominal voltage from 2V-20V.  Do not try to discharge any other type of battery 

using this program.

how to discharge:

1. 1. Select “PROGRAM SELECT Pb BATT” from the main menu then scroll to “Pb DISCHARGE” using 

the “INC” or “DEC” buttons and press the “Start/Enter” button to select.  The display should look 

similar to this:

The discharge current is displayed in the lower left.
The final voltage is displayed in the lower right.
The discharge current ranges from 0.1 to 1A.  The voltage should match the voltage of the battery 

to be discharged.

2. If you need to alter the current or the voltage press the “Start/Enter” button to make it blink then 

change the value with “DEC” or “INC” button.  The value will be stored by pressing the “Start/

Enter” button.  

3. Once the settings are correct press and hold the “Start/Enter” button to begin the discharge 

process.  The display will now show similar to the following:

4. To change the discharge current during the process press the “Start/Enter” button once.
5. The charger will emit a sound to inform you when the process is complete.  To stop the  process 

early press the “Batt type/Stop” button.

Pb  DISCHARGE
4.0A    12.0V(6P)

Pb-6  4.0A    12.59V
DSC   022:45  00682

Battery type

Current

Battery voltage

Elapsed time

Capacity

Содержание LIPRO DUAL 6





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды