J.E. StorkAir MX, Руководство пользователя

Страница: 37 / 56

37
Here the place where the file is to
be saved can be selected and the
file name
can be entered. After tapping on
Save
a empty screen and the
waiting cursor is shown. Now all
data to be saved is read from the
fan and written to the selected file.
Loading:
By tapping on
Select file
the
following screen is shown where
the file to be loaded can be
selected simply by tapping on the
file name:
After tapping on the file to be
loaded the previous screen is
shown again. The
Load
-Button is
available now. Tapping on this
button the values stored in the file
get written to the fan. The screen
can be left by tapping on the Ok-
Button in the upper right corner of
the window.
3.9 The factory menu
Some of the possible settings are
grouped under a special menu
which is only available for service
technicians.
The menu is enabled after entering
a password via the
Settings/Stork
Service/Service
menu. When
you open this menu a screen gets
shown where you can enter the
password. After tapping on
Login
the password is validated and if its
correct the factory menu will be
enabled as long as the MX
Maintenance Software is run. If you
close it and start it at a later time
the password must be entered
again to access the service menu.
The location of the factory menu is
under the settings tab of each
individual fan and it consists the
following menu items:
„
Control parameters (PID)
„
Sense of rotation
„
Maximum speed
„
PWM ramp
„
Min/Max values
„
Password
The password for entering the
factory menu can be changed with