J. D. NEUHAUS PROFI 25TI Скачать руководство пользователя страница 33

Страница: 33 / 72

Page 33

OPERATION

CONTROLS

JDN Air Hoists can be equipped with a variety of control devices.

They are all suitable for use in explosion-hazardous areas.

All control switches return to the zero position when released.

CONTROL VALVE ON MOTOR

Air control (E, F, FI controls) with main-stream control valve

with integrated main-stream valve

The control valve consists of:

1. Main-stream valve

2. Direction control valve as slider with sleeve

The main-stream valve lies upstream of the direction control valve.

If no control pressure is present, this valve is closed and the

direction control valve is depressurised. If control pressure is
applied from the hand control, the valve opens and releases the

main stream.

If the red EMERGENCY STOP button on the hand control
is pressed, all control lines are depressurised and the main-stream

valve is closed.

Rope control
Control valve with upstream main-stream valve. The main-stream

valve is opened via upstream valves when the rope control is

actuated.

The control valve consists of:

1. Main-stream valve

2. Direction control valve as slider with sleeve

3. Positioner

The direction control valve positioner (slider with sleeve)

is mechanically connected to the control lever directly via the

control shaft.

No separate EMERGENCY STOP button is therefore required.

E-CONTROL

With E-control, lifting and lowering movements can be controlled

via two pushbuttons.

The direction of movement of the load hook is marked on the upper

side of the valve housing, above the pushbuttons.

Lifting: Press the right pushbutton.

Lowering: Press the left pushbutton.

E-control with EMERGENCY STOP button

Содержание PROFI 25TI









































































Результаты поиска

Содержание PROFI 25TI

Отзывы:

Похожие инструкции для PROFI 25TI

Бренды по названию

Популярные бренды

J. D. NEUHAUS PROFI 25TI, Оригинальное руководство по эксплуатации и сборке

Результаты поиска

Содержание PROFI 25TI

Отзывы:

Похожие инструкции для PROFI 25TI

Бренды по названию

Популярные бренды