J. D. NEUHAUS JDN mini Series, Инструкции по эксплуатации и сборке

Страница: 8 / 48

MINI series air hoists consist of the
following assemblies:
1 Motor
2 Gearbox with chain drive
3 Controls
4 Chain and hook
5 Chain box
MINI series JDN Air Hoists are chain air hoists for load-
carrying capacities of 125 kg, 250 kg, 500 kg and 980
kg in the EU version. Outside of the EU the maximum
load-carrying capacity is 1000 kg. All models lift using
a single chain. They are equipped with direct controls
and an EMERGENCY STOP device.
Loads can be moved and positioned with precision.
The highest and lowest load hook position is limited
by buffers (emergency end stop).
DA N G E R !
Hook travel limit buffers are for emergency
use only, repetitive impact of buffers is not
allowed! Operator must monitor hook travel
to prevent impact of the buffer against the
hoist body.
JDN MINI Air Hoists conform to driving mechanism clas-
sification 1 Bm in accordance with FEM, corresponding
to M3 as per ISO.
The motors for the JDN MINI air hoists are treated dur-
ing installation with a JDN high-performance grease
(Art. No. 11901). This grease enables operation with
oil-free compressed air. It remains effective for an
operating period of approx. 100 hours and should be
renewed after five years, at the latest (see
Motor lubri-
cation, page 17). Additional lubrication with oil-bearing
compressed air by means of a service unit with oiler
is possible.
MINI series JDN Air Hoist
P RO D U C T D E S C R I P T I O N
A S S E M B LY O V E R V I E W
powered by air !
P RO D U C T I N F O R M AT I O N
Page 8
1
2
4
5
3