J. D. NEUHAUS JDN mini Series, Инструкции по эксплуатации и сборке

Страница: 23 / 48

As an operator of hoists, you are responsible for
your own safety and for that of your colleagues in
the working area of the hoist.
Hoists may only be operated by persons charged
with this task by their company.
Before using the JDN Air Hoist for the first time,
familiarise yourself with all permissible operating
conditions. For this purpose, read through this opera-
tion manual thoroughly and perform the described
actions on the hoist, step by step.
Report each malfunction to your safety officer imme-
diately, so that the fault can be remedied without
delay.
Adhere to the regulations of the accident prevention
authorities (e.g. Berufsgenossenschaft regulations in
Germany).
Read the section Intended use , page 13.
The following uses are classified as impermissible:
Oblique pulling of loads in general.
Definition of oblique pulling
Oblique pulling is the deviation of the load chain and
the chain hoist from the vertical position, for a force
acting in a straight-line between the point of force
application of the load on the load hook and the
point of suspension on the supporting structure.
Under special safety provisions relevant to the
particular situation, JDN Air Hoists may be used
for oblique pulling (see
Intended use , page 13).
In this case, a chain box must not be used as the
chain may fall out or become knotted.
Oblique pulling is not permitted for hoists installed
in trolleys or in running gear. Please contact us,
if required.
Detaching or dragging of loads.
Loading of the hook at the tip.
Catching of falling loads.
Carrying persons (see Intended use , page 13).
Jog control with load on the hook.
Switching to the opposite direction with load
in motion.
Operational reaching of lifting and lowering limiters.
Never hold the chain in the area of the centre sec-
tion under tension at the upper or lower limit posi-
tion of the load hook.
Oblique pulling
R U L E S F O R S A F E O P E R AT I O N
O F H O I S T S
powered by air !
O P E R AT I O N
Page 23
O P E R AT I O N