2
Fit the floor
protectors (5)
provided on the
top and bottom
of each leg.
4
3
Fit two more short shelf supports
(1)
at the desired height then fit two more
long shelf supports (2) to match the
short shelf supports (1).
Repeat this step for the bench
supports at the top of the legs.
Decide on the position
you require the bottom shelf to be.
Fit one short shelf support
(1) between two leg angles (3).
Repeat this again
making sure both short shelf supports (1)
are at the same height.
Now fit two long shelf supports
(2) matching the same
height as the two short shelf supports (1).
Always hammer gently,
being sure the shelf support tabs
are in line with the leg angle slots.
If the tabs are out of line,
simply bend them to line up
either way to suit.
Do not use force
and damage the tabs.
When hammering the shelf supports,
always hammer
close to the leg angle.
1
Secure the
MDF shelves (4)
after full frame assembly.
onto the shelf supports
For damaged or missing parts, please email
3/3
