background image

INSTRUCTIONS FOR INSTALLING ADJUSTABLE GATE PLATE (GTPLKIT & GTPL230X)

104918 sheet 1

For device installation videos,

scan code below or

go to www.detex.com/vidoes

Table of Contents

Device parts breakdown view with part numbers.................................
Install gate plate and strike bracket......................................................
Install Value Series or Advantex mounting plate and strike.................
Install 03GS, 08GS or 08GSN options for Value Series/Advantex......
Install ECL-230X mounting plate..........................................................
Install 03GS option for ECL-230X........................................................

Owner's Copy

Sheet

   2
   3
   4
   5
   6
   7

Detex Corporation,  302 Detex Drive,  New Braunfels,  Texas  78130-3045

830-629-2900  /  800-729-3839  /  Fax 800-653-3839  /  Text photos only: 830-481-6433  /  INTERNET: www.detex.com

104918   March 26, 2020               B

For WARRANTY information,

scan code below or

go to www.detex.com/warranty

Should you have a Qustion/Problem with your Detex device please call Detex Technical Support

from the job site at 1-800-729-3839 and choose option 2 on our menu. Please do not return the

product to the distributor.

Drawing # 105959

Summary of Contents for GTPLKIT








Reviews: