14
Latte MMF-009
EN
•
use the soft brush to clean the axle inside
the jug by following the instructions as seen
in the figures below.
•
Wash out the lid and the whisks with water
and let them dry.
•
Clean the exterior with a soft cloth.
Troubleshooting
Item
Issue
Reason
Solution
1
Indicator light
doesn’t work,
appliance
doesn’t work
1. Plug is not inserted properly.
Re-insert
2. Jug and power base has poor
contact.
Remove the jug
3. no power
Check the electric circuit
4. Problem with components
Contact authorized bEnRubI
service center
2
Appliance
ceases to work
after starting
operation
1. Jug temperature is too high
Rinse cold water inside the jug to
reduce temperature
2. Jug damaged with immersion
in water
Contact authorized bEnRubI
service center
3
Motor doesn’t
work
1. Jug not cleaned after use, milk
locks the mechanism.
Clean the axle inside the jug
thoroughly
2. Motor damage
Contact authorized bEnRubI
service center
4
no heating
Appliance damaged
Contact authorized bEnRubI
service center
5
Charring
1. Dosage of milk either too little
or too much
use the dosage of milk
according to the indications
“MIn” & “MAX”
2. Jug reused without cleaning
Clean the axle inside the jug
thoroughly
3. Actual voltage much lower than
specified voltage
Make sure that the voltage rating
of the appliance corresponds to
that of your household supply.
