15
Using the Appliance
• Before use, make sure the timer (9) is in the “0” position
• Prior to use, make sure that the water tank (6) has water. Do not use the appliance if there is no
water in the water tank.
1. Place the appliance on a clean, flat and heat-resistant surface.
2. Fill the water tank (6) to the “MAX” indication. The amount of water should not exceed the "MAX"
indication and should not be less than the "MIN" indication.
Note: Do not add anything to the water, such as spices, sauces, salt, pepper, etc. to avoid damage
to the surface of the container and the resistor.
3. Place the liquid tray (5).
4. Install the bowl (2) number of your choice and the lid (1).
Note: Make sure that the separator ring (4) is correctly positioned so that it fits into the bowl (2).
Then make sure that the bowl that you place on the respective ring is firmly attached to the edge of
the ring and that all the bowls are aligned with each other.
5. Plug in the appliance.
6. Turn the timer (9) clockwise to the desired position, depending on the bowls you use and the type
of food. Refer to the table of suggested times below. The indication light (8) will turn on and the clock
will sound.
7. When the time is up, a beep will sound and the indication light (8) will turn off.
8. Unplug the appliance.
9. Carefully open the lid and place the bowls on plates so that the liquids do not drip.
Note: Always use oven gloves.
10. Allow the appliance to cool down.
11. Empty & clean the liquid tray (5) after each use.
12. It is recommended to empty the water tank (6) after each use if the appliance has cooled down
completely.
Notes:
• If you want to remove food before the preset time is up, unplug the appliance and let it cool down.
The timer will operate until it reaches the “0” position and the characteristic sound is heard. Do not
turn the timer counterclockwise.
• If the water in the water tank runs out or the level drops below “MIN” before cooking is complete,
unplug it and refill it with water from the water supply inlets (10). Plug in the appliance and finish
cooking.
Rice Bowl Use
1. Fill the rice bowl (3) with rice, to the middle at most.
2. Add water (400g rice / 500ml water).
3. Place the rice bowl in the top bowl (2).
Note: If you place the rice under other foods, the juices from the food will alter the taste of the rice
or it may become muddy.
4. Set the timer to the desired time. For the maximum amount of rice (400g), it will take 45-50
minutes.
Note: You can adjust the time according to the type of rice, the quantity and your preferences.
5. When the time is up, a beep will sound and the indication light (8) will turn off.
