Configuration
interface are connected to the header. A separate slotplate with two Sub-D-9 connec-
tors is connected to the header via a 9-pin ribbon cable with the header of the interface.
All pin allocations of the Sub-D connectors conform to the CiA specification CiA/DS-102.
As a further option, a version without bus connection on the interface is available. In
this case the signals are led out on two connector boards each (JP14/JP15 for the
first CAN line, JP24/JP25 for the second CAN line). This enables the implementation of
alternative bus connections.
A CAN protective circuit, consisting of a special CAN coil is also available as an option.
The circuit suppresses faults and short spikes on the CAN lines.
3.2.1 Connection of the bus interface
The signals of the
first bus interface
are connected to the 9-pin Sub-D connec-
tor/socket.
Pin no.
JP15
Pin no.
Sub-D-9
Signal name
1 1
n.c.
2 2
CAN-Low
3
3
GND (via JP3/JP32)
4 4
n.c.
5 5
n.c.
6
6
GND (via JP5/JP33)
7 7
CAN-High
8 8
n.c.
9
9
VCC (via JP4/JP36)
10 -
-
Copyright IXXAT Automation GmbH
PC-I 03 - Manual, Version 3.2
11
Содержание PC-I 03
Страница 4: ......
