IXXAT FlexRay CCM/ FRC-EP150, Руководство по оборудованию

Страница: 5 / 33

Copyright IXXAT Automation GmbH
FlexRay CCM Manual, Version 2.4
Introduction
5
1 Introduction
1.1 Overview
The FlexRay CCM/FRC-EP150 is a powerful PC interface for the analysis, diagnos-
tics and stimulation of FlexRay and CAN networks.
This manual is intended to help you make full use of your interface. Please read
this manual before beginning with installation.
1.2 Features
•
Measuring and analysis platform for FlexRay and CAN networks
• FlexRay connection via plug-in boards. Upgradeable to future protocol ver-
sions
• Current FlexRay protocol support via Freescale MFR4310
•
FlexRay Dual Channel 2 x 10 MBit/s
•
FlexRay Dual Communication Controller option available
• FlexRay bus connection via the Physical-Layer-Chip Philips TJA1080
•
2 x CAN bus connection in accordance with ISO 11898-2 and 11898-3
switchable via software
•
2 x CAN bus connection in accordance with ISO 11898-2 (FRC-EP150 only)
•
Fast Ethernet 100 MBit/s
•
Trigger interfaces: 4 x output, 2 x input
•
Powerful microprocessor Power PC 866 with 133 MHz, 64 MByte RAM
and 32 MByte FLASH
• Highly integrated FPGA with one million gates for FIFO-memory, time stamp
and extended routing
• Two microcontrollers HCS12 for FlexRay and CAN communication
•
All interfaces galvanically isolated
•
Power supply from 6 to 50 V DC with overvoltage and reverse battery protec-
tion
•
Housing and connectors suitable for use in automotive environment
• Open FlexRay and CAN PC driver interface (VCI) for Windows XP,
Windows 2000 and Windows Vista
Fig. 1-1/1-2 shows the block diagram of the basic board with all main interfaces
and Fig. 1-3/1-4 the block diagram of the FlexRay plug-in board. Depending on
the version of the FlexRay plug-in board, the architecture can be differently de-
signed.