Aluminum housing version
2.1.2 Serial interface RS232 (X2)
The signals of the serial port are connected to the 9-pin Sub-D connector X2 (see
table 2-2). The pin allocation complies with the standard for DTE devices. For
configuration of the device with a PC, you require a laplink cable.
Pin no.
X2
Signal
1 DCD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Table 2-2: Pin allocation RS232
2.1.3 CAN (X3)
CAN is available on connector X3 with a bus interface according to ISO 11898-2.
The signals of the bus interface are connected to the 9-pin Sub-D connector X3
(see Table 2-3). The pin allocation complies with the standard CiA DS102
Pin no.
X3, X4
Signal
1 -
2 CAN
Low
3 GND
4 -
5 -
6 -
7 CAN
High
8 -
9 -
Table 2-3: Pin allocation CAN
Copyright IXXAT Automation GmbH
CANlink II - Manual, V1.3
12
