Support: 855-473-7449 or 408-943-4100 Email:
Page 11
6.2 Hard Drive Trays (R20)
To remove a hard drive tray, press the locking arm release at the right side of the tray front. Swing the arm out until
it completely stops, then pull the tray free from the system.
To install a hard drive tray into a system, push the tray into a slot until the locking arm begins to swing closed. Gen
-
tly push the arm into place to seat the tray and secure it in the system.
No tools are required to install a drive in a full size hard drive tray. Make sure the drive connectors are pointed out
the back of the tray and push the drive side screw holes into the fixed retention pegs on one side of the tray. Con
-
tinue to push the other side of the drive down into the flexible retention pegs to secure the drive in place.
To remove a drive, push out the side attached to the flexible retention pegs from the bottom of the tray, then lift the
drive free.
