Support: 1-855-473-7449 or 1-408-943-4100
Email:
Page 3
3 Rail Kit Assembly
3.1 Separate Cabinet Rails from Rack Rails
Each rack rail includes an inner cabinet rail that must be removed. Extend the cabinet rail as shown below until the
white release tab is exposed. Slide the white release tab to the right to release the cabinet rail. Remove the cabinet
rail from the rack rail. Repeat the process for the second rail.
The cabinet rails are mounted on each side of the system. Align the cabinet rail keyholes with the posts on the side
of the chassis. Slide the rail towards the rear of the system until the metal tab clicks and secures the rail in place.
Repeat this process on the other side.
3.2 Mount Cabinet Rails
The ES60 occupies 4U of rack space. The rails are mounted in the center 2U of that space.
Cage nuts for racks with square and round holes are included. Install four cage nuts inside the rack, two where the
rails attach to the front of the rack, and two at the rear. Align each cage nut with the others, both front to back and
left to right. The cage nuts provide an attachment point inside the rack for the rail screws.
The rail ends are stamped Front and Rear. Place one rail in the rack with the Front stamp at the front facing out
-
wards. The Rear stamp goes at the back of the rack. Align the pins on both rail ends with the mounting holes in the
rack. Make sure the cage nuts line up with the rail holes. Push the pins in to the rack holes until they lock in place.
Use the provided screws to secure the rails to the cage nuts.
3.3 Mount the Rack Rails
M4 Screws
Front
Back
