IXOM ResidualHQ Скачать руководство пользователя страница 32

Alarm Message

Alarm Message

ID

ID

Problem/Conditions

Problem/Conditions

Possible Cause

Possible Cause

Possible Solution(s) or Next Step(s)

Possible Solution(s) or Next Step(s)

Loss of Flow Detected

300

System has momentarily lost 

ability to confirm proper flows

Non-critical warning

If issue persists, or becomes more 
frequent, could signify maintenance is 

required on flow verification sensors. 

See Maintenance documentation for 
more details.

Loss of Circulation 
Detected

301

System has momentarily lost 
circulation

Non-critical warning

If issue persists, or becomes more 
frequent, could signify issues with Pre-
Mix Tank, Sample Pump, or Return 
Pump. 

See Maintenance documenta-

tion for more details.

Daily Volume Limit 
Reached

302

System has fed the maxi-
mum allowed chemical 
volume in 24 hour period.

Incorrect settings

Non-critical warning. Will self-correct 
clear at 0:00. Verify feed settings 

are appropriate for recent flows and 

residual levels.

Increased chemical demand

Low Bulk Chlorine 
Level Detected

303

Level reported is below alert 
setpoint

Low level in chlorine bulk 
tank

Non-critical warning. Ensure low 

level is not due to leaks/spills. Refill if 

necessary.

Incorrect settings/scaling 
factors

Check sensor/transducer scaling, and 
thresholds at 

Base > Configure > Data.

Low Bulk Ammonia 
Level Detected

304

Level reported is below alert 
setpoint

Low level in ammonia bulk 
tank

Non-critical warning. Ensure low 

level is not due to leaks/spills. Refill if 

necessary.

Incorrect settings/scaling 
factors

Check sensor/transducer scaling, and 
thresholds at 

Base > Configure > Data.

Low Monitored Tank 
Level Detected

305

Level reported is below alert 
setpoint

Low level in monitored tank

Non-critical warning. Ensure low 

level is not due to leaks/spills. Refill if 

necessary.

Incorrect settings/scaling 
factors

Check sensor/transducer scaling, and 
thresholds at 

Base > Configure > Data.

The table below summarizes system Warnings. The following may self-correct, but could adversely impact system 
performance.

Warnings:

©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]

Troubleshooting

Troubleshooting

10351_20220119

ControlManual_ResidualHQ_10380_20220809a - 30

Содержание ResidualHQ


































Отзывы: