STEP 1:
Locate one end of the hose section and place hose clamp over the end. Be sure that hose and
clamp are installed above the metal rib of the flange and then tighten hose clamp as tight as possible
to firmly secure hose.
(See Figure 5)
STEP 2:
Fasten Hose to bottom of machine by pushing hose up and all the way up above metal rib.
(See Figure 6)
STEP 3:
On the other end of the hose place the other hose clamp over the end. Fasten hose to the intake
box past the metal rib of the flange and tighten hose clamp to firmly secure hose.
(See Figure 7 & 8)
5
6
7
8
©2021 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Small Frame Assembly
SB/GF1250PWc
SB/GF1250PWc Assembly
Assembly Diagram
10312_20210810
O&M_GF1250PWc_10110_20210922 - 6
