All electronic connections on the GridBee
equipment should only be used for the inputs or
outputs that they are labeled and designed for. If
any of the leads going into the electronic controller
are disconnected, be sure when re-connecting to
place them in the proper position.
Wiring -
All electric wiring includes corrosion-
resistant, industrial cords with molded, weather
and watertight connectors. The connectors
are indexed to prevent improper wiring. A
general electrical schematic can be found in the
Maintenance and Field Adjustment section.
Brushless Motor
- The brushless motor is located
directly below the Top Deck. 4 bolts run down
through the Top Deck and into the housing of the
brushless motor fastening it onto the machine.
The brushless motor is built to be very durable.
The housing is constructed of casted aluminum.
The brushless motor runs very quietly and
smoothly. It does not require any maintenance. A
drive shaft extends through the bottom center of
the housing.
Shaft Coupling
- The shaft coupling connects the
brushless motor drive shaft to the impeller shaft.
The shaft coupling is located directly below the
brushless motor.
The rotating assembly (motor, shaft coupling,
impeller shaft, impeller) can be removed from the
machine without disconnecting the shaft coupling.
Durable Wiring And Connectors
Brushless Motor
Brushless Motor With Shaft Coupling Attached
©2021 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Features
Features
GF1250PWc
10289_20210806
O&M_GF1250PWc_10110_20210922 - 9
